Use this search to find vinyl decal on any themes (for example: elephant, anime, rock, etc)

How to apply vinyl graphics tutorial

How to stick decals?

  • The decals can be easily applied on all smooth surfaces, such as Walls, Doors, Windows, Closets, Plastic, Metal, Tiles etc.
  • Applying decals on a bumpy surface will be a bit more difficult.
  • Vinyl decals are similarly applied on any surface, whether it is wall, vehicle or any other thing.

Here is the instruction on how to stick vinyl:

  1. Clean the surface thoroughly with soapy water or glass cleaner then dry with a cloth. Measure and mark the exact spot where your sticker is going.
  2. Position your sticker in place using the masking tape, leaving one end free. If the sticker is too long, you can place the masking tape in the center and do it in 2 steps.
  3. Peel back the application tape gently, making sure the sticker is stuck on it. Discard the backing sheet. (Cut half of the backing sheet with scissors if you need to).
  4. Hold the sticker from the free end and pull tightly close to the surface but don't let it touch the surface yet.
  5. With the squeegee in the other hand, start applying some pressure on the sticker towards the inside, in an up and down movement until you reach the end. Remember to keep an eye on the alignment of your sticker.
  6. Run the squeegee along your sticker a few more times with more pressure to achieve strong adhesion.
  7. Peel back the application tape gently, making sure not to peel the sticker off with it.
  8. If any air bubbles appear, you can pierce the edge with a needle and force the air out with your finger and that's it, you're all done.
  9. If you are applying a large sticker, you should ask another person to help you and then the process will be much easier.

There is nothing difficult in applying a sticker. Good luck